Hubbell Floor Box Installation Instructions
Hubbell Floor Box Installation Instructions. Remove top mounting flange [2] with. Press concrete cover firmly in place.
Use the provided floor gasket [1] or apply a 1/4 inch [6.3 mm] thick continuous bead. Hubbell® taymac® wallplates and hvac catalog; Web threaded opening of floor box cover or underfloor deck/duct using the ¾” or 1” nipple b (provided).
Web Before Concrete Pour Box Installation:
Web the tile using the installation instructions included with the rafb. Lock unit against rotation by tightening setscrew c. Install data plates and associated data components into service fi tting.
Determine The Location Of The Ffb From The Electrical Drawings.
Remove concrete cover c and discard. Use the provided floor gasket [1] or apply a 1/4 inch [6.3 mm] thick continuous bead. Web threaded opening of floor box cover or underfloor deck/duct using the ¾” or 1” nipple b (provided).
Do Not Cut Box, Box Should Protrude Above Fi.
Separate concrete cover and box. Web install floor box and flooring in accordance with the instructions provided with the floor box. 15a, 125v tamper resistant receptacle.
Web Single Gang Floor Box Kit With Recessed Duplex 15A Tr Device And Adjustable Steel Box, Nickel Finish.
Can be used for power/data. Hubbell® taymac® wallplates and hvac catalog; Remove top mounting flange [2] with.
Web Floor Box Design And Electrical Floor Outlet Specification Center.
See steps 7 and 8. For plate (a) installation remove the installation plate (j), black spacer (o) and retain the screws (l). Install reducing bushings if needed, hand tighten reducing bushings, then tighten an extra 1/4 to.
Post a Comment for "Hubbell Floor Box Installation Instructions"